Product Overview
The Bogen CA-Series Call-In Switches are attractive, functional units for call-in from classrooms or other staff locations to Bogen’s PI35A and SI35A Intercom Systems, Multi-Graphic© Series 115B, 2223, and 2233 Institutional/School Communication Systems, and Multicom 2000® Administrative Communication Systems. The switch is a two-position, rocker-type, single-pole, normally open switch. When pressed, the switch energizes the corresponding annunciator lamp and the call-in tone at the room selector panel, and maintains this condition after the switch is released and until the call is acknowledged by the operator.
- Designed for use with the PI35A, SI35A and MultiGraphic Series 115B/2223/2233 systems
- SCR holding circuits actuate the annunciator signal and LEDs in Bogen’s SBA-Series room selector panels
- Provide momentary press-to-call
General Information
Name : Bogen CA10A Call-In Switch, Designed for use with the PI35A, SI35A and MultiGraphic Paging Systems, Aluminum , Bogen
Category : Public Address & Voice Alarm Systems
UPC Code : 765368420210
Country of Origin : United States. Country of origin is subject to change.
Specifications
General Information
ADI Part Number : BO-CA10A
Brand Name : Bogen
Manufacturer : Bogen Communications International, Inc
Manufacturer Part Number : CA10A
Product Model : CA10A
Product Name : CA10A Hard Wire Dimmer
Product Type : Hard Wire Switch
Miscellaneous
Additional Information : <ul><li>SCR holding circuits actuate the annunciator signal and LEDs in Bogen's SBA-Series room selector panels</li><li>Provide momentary press-to-call</li></ul>
Compatibility : <ul><li>Bogen's PI35A and SI35A Intercom Systems</li><li>Multi-Graphic Series 115B, 2223, and 2233 Institutional/School Communication Systems</li><li>Multicom 2000 Administrative Communication Systems</li></ul>
